Cairn Alabaster Floor Lamp-Fast Shipping

Description

SOLID NATURAL ALABASTER · 4 STACKED DIAMOND SECTIONS · 59″ TALL · INTEGRATED LED

Four alabaster diamonds stacked into a 59-inch glowing column — a sculptural floor lamp on a marble base

Cairn is built from four hand-cut alabaster sections — each carved into a tapered diamond — stacked in alternating orientation along a single column. The natural translucence of alabaster lets warm light glow through every section evenly, revealing the stone’s fibrous veining from within. The whole column rests on a solid marble base that anchors its 59-inch height.

Compact footprint at 28 × 24 cm (11″ × 9.4″) — stands beside a sofa, in a reading corner, or as a single sculptural anchor in a foyer. Plug-and-play with integrated LED — no electrician required, no bulb shopping needed. Default 3000 K warm white; custom 4000 K or 6000 K available on request.

Hand-Cut Alabaster Diamonds

Four diamond-shaped sections cut from natural alabaster — each carries its own fibrous veining and tonal warmth. No two columns are identical.

Even Translucent Glow

Integrated LEDs distributed along the column light every section evenly — no dim sections, no hot spots. Reads as one continuous glow.

Solid Marble Base

Square marble base anchors the 59″ column securely. Plug-and-play on a 5 ft cord — no electrician required.

What it’s made of

ColumnFour sections of solid natural alabaster — translucent stone, hand-cut and polishedBaseSolid marble — matte black finish, square footprintLight SourceIntegrated LEDs distributed along the inner columnEach alabaster section is one-of-a-kind. Alabaster is a natural translucent stone formed over millennia — fibrous veining, tonal warmth, and grain direction vary between every section we cut. The four diamonds in your column will read as a family but never as identical twins. The marble base may also show subtle pattern variation between pieces.

Dimensions

Click to enlarge ↗ Width 28 cm / 11″Depth 24 cm / 9.4″Height 150 cm / 59″

Color temperature

DEFAULT3000 K Warm WhiteSoft amber-toned glow that complements the natural cream of alabaster and the warm undertones in the marble base. Integrated LEDs are rated for roughly 50,000 hours of use — at 3 hours per day, that’s over 45 years of a different color temperature? 4000 K neutral or 6000 K cool white available on request — message us before placing your order and we’ll configure it for you at no extra cost.

Specifications

Downloads

Spec Sheet

Frequently asked

Will the alabaster sections all look the same?No — and that’s the point. Alabaster is natural stone, so each of the four diamond sections will have its own veining direction and tonal warmth. The four pieces in your column will read as a coherent family — same color tone, same finish — but never as identical I replace the bulbs?Cairn uses integrated LEDs distributed along the inner column — they’re not user-replaceable like a screw-in bulb. They’re rated for roughly 50,000 hours of service, which is over 45 years at 3 hours per day. For warranty service or if a section ever fails, contact our team the marble base heavy enough to keep it stable?Yes — the solid marble base is intentionally weighted to anchor a 59″ column securely against accidental bumps. For households with pets or small children, we recommend tucking the cord along the wall so it can’t be pulled. Lift from the marble base (not the alabaster sections) when do I clean it?Wipe gently with a soft dry cloth — both the alabaster column and marble base. For deeper cleaning, use a slightly damp cloth, never soak the stone or use acidic cleaners (lemon, vinegar, bleach), which will permanently etch both alabaster and the alabaster glow when lit?Yes — alabaster is naturally translucent. When the integrated LEDs are on, each diamond section glows softly from within, revealing the fibrous veining like a slice of frozen amber. The effect is most striking in dimmer rooms; in brightly-lit daytime spaces, the column reads as a sculptural object first and a light Cairn certified for North America and Europe?Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide.