Description

Flora Pleated Fabric Semi-Flush Mount — Scalloped Shade, Solid Wood Base, 3 Sizes

A scalloped fabric shade — pleated in vertical panels that gather into a petal-like silhouette — mounts close to the ceiling on a solid wood base with a warm gold finish. The off-white fabric diffuses E27 bulb light upward and outward, spreading ambient light across the ceiling rather than casting a direct downward beam. Available in three diameters (40, 50, and 60 cm / 15.7, 19.7, and 23.6 inches), the Flora works as a semi-flush ceiling light in bedrooms, dining rooms, and living rooms where clearance between ceiling and fixture matters.

Key Features

Pleated Fabric Shade

Vertical pleats gather into a scalloped petal outline; diffuses light through the fabric wall.

Semi-Flush Mount

Sits close to the ceiling — suitable for rooms with 8–9 ft ceilings where pendant drop isn’t ideal.

Solid Wood Base

Gold-finished solid wood canopy and bottom finial; no painted plastic components.

3 Sizes Available

Ø40 / Ø50 / Ø60 cm — select by room size and ceiling clearance requirement.

E27 Socket

Standard E27 base; accepts a wide range of bulb shapes. Bulb not included.

Upward + Ambient Light

Fabric walls diffuse light in all directions; no harsh downward-only beam from this fixture.

About the Fabric Shade

The pleated fabric panels are hand-stitched onto the frame. Minor variation in pleat spacing and shade roundness is normal for this construction method. Do not use steam or an iron directly on the fabric — a soft brush or compressed air removes dust without distorting the pleats.

Size Guide

🔍 Tap any image to enlarge

Choosing a Size

A common guideline: add the room’s length and width in feet, and the result in inches is a reasonable shade diameter. For example, a 12 × 14 ft bedroom (26 ft total) suggests a 24–26-inch / 60–65 cm shade as a ceiling fixture.

Bulb

E27 · 1 bulb · Bulb not included

Standard E27 medium base. The fabric shade fully encloses the bulb, so bulb shape is not visible from below. A round or globe-form bulb fits the interior geometry cleanly.

Specifications

Spec Sheet (PDF)

Installation Notes

• Hardwired ceiling installation — a licensed electrician is recommended.
• Compatible with standard wall switch (not included). Dimming possible with a dimmable E27 LED bulb and compatible wall dimmer; no built-in dimmer on this fixture.
• E27 socket — twist-lock bulb replacement, no tools required. Bulb not included.
• For indoor, dry locations only. Not suitable for bathrooms or damp areas.
• Sloped ceiling compatibility depends on canopy hardware; contact us before ordering if your ceiling pitch exceeds 15°.

FAQ

How much clearance does this fixture need below the ceiling? As a semi-flush mount, the fixture sits close to the ceiling — the wood canopy mounts flush and the shade hangs directly below it. The total drop from ceiling to the bottom of the shade is determined by the shade height; this style typically projects 10–14 inches below the ceiling depending on shade size. It works on standard 8-foot ceilings without the fixture feeling too size should I pick for my bedroom or dining room? For a typical 10 × 12 ft bedroom, the Ø50 cm (19.7 in) is a comfortable fit — large enough to fill the visual center of the ceiling without feeling oversized. For a dining table up to 48 inches wide, the Ø60 cm works well centered above the table. The Ø40 cm suits smaller spaces like home offices, hallways, or walk-in I use a dimmable bulb with this fixture? Yes — the fixture has a standard E27 socket and no built-in circuitry that would block dimming. Install a dimmable E27 LED bulb and pair it with a compatible wall dimmer switch (Triac or leading-edge dimmer rated for LED). The dimmer switch is not do I clean the pleated fabric shade? Use a soft dry brush or low-pressure compressed air along the pleats to remove dust. Do not use water, damp cloths, or steam — moisture can cause the fabric to shrink or lose its pleat definition. The wood base can be wiped with a dry the Flora certified for use in North America and Europe? Yes. It holds certifications compatible with North America, Saudi Arabia, Europe, and Australia and operates on AC 110–240V worldwide.