Description
A small modern wall sconce — a half-cylinder of natural travertine emerging from a slim dark-wood backplate, like a rock outcrop from a cut bank. The stone’s open pitting catches and scatters the warm-white bulb’s light into a soft, textured glow on the wall above and below. Two sizes: 6.3″ or 9.5″ tall. For hallways, bedside, vanity, or flanking a mirror.
Natural travertine shade
Real travertine half-cylinder with the stone’s signature open pitting — each piece is unique.
Dark-wood backplate
Solid dark-wood backing in a warm walnut tone; the wood’s grain shows on every piece.
Up + down glow
Open top and bottom — the bulb washes light onto the wall above and pools it below.
Two Sizes
| Size | Diameter | Height | Best for |
|---|---|---|---|
| Small | 2.5″ (6.5 cm) | 6.3″ (16 cm) | Bedside, narrow hall, gallery accent |
| Large | 2.5″ (6.5 cm) | 9.5″ (23 cm) | Vanity, entry, flanking a tall mirror |
Size Reference
🔍 Tap to enlarge
| Material | Travertine, Wood |
| Shade | Natural travertine half-cylinder |
| Backplate | Solid dark wood, walnut tone |
| Light source | One E26/E27 medium-base bulb · max 40W (LED recommended) |
| Light color | Warm white (pick bulb temperature to taste) |
| Size (D × H) | Small: 2.5″ × 6.3″ (6.5 × 16 cm) Large: 2.5″ × 9.5″ (6.5 × 23 cm) |
| Power | AC 110–240V; hardwired over a standard junction box |
| Control | Wall switch on/off |
| Use | IP20 indoor and dry locations only |
Natural travertine — each piece is one of a kind
Travertine is a natural limestone with characteristic open pitting and warm cream-to-tan banding. Each shade is cut from a single piece, so pitting pattern, color shifts, and veining vary between sconces — part of the stone, not a defect. Email us for photos of in-stock pieces before ordering, especially if you need a matched pair.
Use an LED bulb only — protects the stone and the wood
The bulb sits in a small cavity between stone and wood. Use only an LED bulb up to 40W — incandescent and halogen run hot enough to discolor natural stone over time and scorch the wood. Do not exceed the wattage on the socket label.
Installation & Care
- Hardwired wall mount over a standard junction box — a licensed electrician is recommended.
- Use one E26/E27 LED bulb, max 40W (or LED equivalent). Never use incandescent or halogen — the small bulb cavity traps heat. Bulb not included.
- Mounts vertically as shown. Install in pairs to flank a mirror, headboard, or art; allow 24–30″ between the two centers for symmetry on vanities or beds.
- Controlled by a standard wall switch (on/off). Not designed for external dimmer compatibility — pair with a standard switched circuit.
- Indoor and dry locations only (IP20). Safe in damp vanity areas away from shower spray; not rated for wet zones. Confirm your local code before bathroom installation.
- Handle the travertine shade gently during install — natural stone can chip at the edges if knocked. Once mounted, the sconce is stable; the risk is during unpacking and hanging.
- Dust the stone and wood with a soft, dry cloth. No water on the travertine (it’s porous and will spot) and no solvents on the wood finish.
Downloads & ResourcesSpec Sheet Installation Guide
FAQsIs this travertine the same as alabaster?
No. Travertine is a porous limestone with open pitting — it scatters light in a textured, freckled glow. Alabaster is smoother and more translucent — it spreads light evenly through the stone. Travertine reads warmer and more architectural; alabaster reads softer. Both are natural stone; choose travertine if you want texture, alabaster (a separate product) if you want diffusion.
Which size should I pick?
The 6.3″ Small suits bedside, narrow hallways, or as a small gallery accent. The 9.5″ Large works well on a vanity, beside an entry mirror, or flanking a taller mirror or headboard. Both share the same 2.5″ diameter. Pair two of the same size for symmetry.
What bulb does it take?
One E26/E27 medium-base bulb, max 40W (or LED equivalent), not included. Use only LED — incandescent and halogen run hot in the small cavity and can discolor the stone and wood over time. A warm-white LED gives an even glow through the travertine’s pitting.
Can I use it in a bathroom?
In dry or damp areas only — beside a vanity mirror, away from shower or tub spray. The sconce is IP20 (indoor/dry), not waterproof. Travertine is also porous and will absorb water, so keep it well away from moisture. Confirm your local electrical code before bathroom installation.
Is there a warranty?
2-year warranty on wiring, socket, and finish. Natural travertine pitting and wood-grain variation are not defects; chips from drops, water stains on the stone, and discoloration from using an over-spec or non-LED bulb are not covered. Email support with photos within 7 days of delivery for any transit damage.
Reviews
There are no reviews yet.