WinTaim 17 mm DCF Radio-Controlled Movement with Hand Sets, Silent Movement for Wall Clock, Black, Radio-Controlled Movement for Replacement DIY-Fast Shipping

Description

Radio Controlled Movement Size: 72 x 56 x 19mm (2.83 x 2.2 x 0.74 inch), Installation Tips: 1. First, attach the movement to the main body of the middle case. 2. The hour and minute hands are seconds to install the pointer for the standard 12. 3. Pull out the positioning pin on the back of the movement. 4. Insert the battery, it automatically searches for local signals

The shaft length of the movement: shaft length: 0.67 inches (17 mm), screw thread length: 0.34 inches (8.7 mm), adjust a watch with a thickness of about 3-5 mm. With golden hex nut, gold metal disc, black rubber washer. Can be used on the watch board with a diameter of approx. 240-300 mm

Battery size: AA/LR6 (alkaline), if you encounter any problems when using our product, regardless of package problems or do not know how to adjust them, please contact us freely. We would show you our best services, please do not submit the return so quickly.

Measure 90mm from the middle hole of the hand to the top hour hand. Minute hand: 120 mm. Second hand: 110 mm, applicable to the plate with a diameter of about 240-300 mm

Warm note: when you install them, please keep the hour hand and minute hand parallel; And please do not apply too much pressure so as not to bend them. DIY Watch Accessories The complete clock movement kit is suitable for repairing or making a watch and serves as a good replacement for large and thick watch frames.